Lower the handle flat to the floor to clean under beds or lower it to the intermediate stop position to maneuver over rugs. Depress the foot pedal again to bypass the intermediate stop position, or close this position by moving the orange, handle-position slider to the right.

The integrated, instant-use wand and suction hose are always ready. Just pull out either tool to clean hard-to-reach corners, edges, and crevices. The wand and hose together have an eight-foot reach. The suction hose is ideal for cleaning furniture. And an optional nine-foot extension hose is available, which creates a total hose length of 15 feet . . . perfect for cleaning stairs. Choose from a range of optional attachments that can be fitted to the wand or hose!

It features an S-class pre-motor microfilter, a three-layer AeraPure™ bag, an exhaust filter, and a tightly sealed casing, which prevents dirty air from escaping through its seams.

The electronic controller adjusts the power head up or down to the appropriate brush height, providing optimal cleaning of both carpets and hard floors. The “sealing strip,” located behind the brush, improves hard floor performance by channeling the airflow upward and preventing debris kickback.

Two green lights, one for “up” and one for “down,” illuminate to indicate when the power head is adjusting the brush height to the proper cleaning level. Optimal cleaning effectiveness occurs when both lights are off.

If an obstruction jams the brush roller, the red “check brush” warning light flashes quickly, the brush roller immediately stops spinning, and the vacuum shuts off. This feature prevents the belts from breaking and protects the motor and carpet from damage.

When the brush roller’s bristles are worn to a point that brush agitation is less effective, the red “check brush” warning light remains illuminated during use. (The vacuum continues to operate; it will not automatically shut off.) When needed, installing a new brush roller or cleaning hair or other debris from a used brush is quick and easy, and no tools are required!

When the vacuum is stationary in its upright, handle-locked position, the power head adjusts upward to the height necessary (or to its highest possible level) to disengage the spinning brush roller from the floor. However, if the brush remains in contact with carpet fibers, despite the power head’s upward adjustment, the red “check brush” warning light flashes to alert the user to avoid potential carpet marking from excessive use time in a stationary position. Usually, very high-pile carpets cause this situation, or the vacuum is tilted forward, toward the brush roller, while using the cleaning wand and/or hose. The solution is to tilt the locked, upright handle backward, such that the brush is raised above the carpet pile.

When a full bag, a clog in the airflow pathway, or an excessively dirty microfilter is detected, the red “bag full or clog” warning light illuminates, and the vacuum automatically shuts off after 30 seconds. This feature prevents overheating and motor damage from a lack of adequate airflow.

It’s easy to carry the vacuum or quickly unwind the cord, using its unique handle with integrated, rotating cord hook.

The vacuum includes a crevice tool, dusting brush, upholstery nozzle, and a large 1.4-gallon filter bag. Also, many optional accessories are available.

The AUTOMATIC X’s heavy-duty, geared belts should last the life of the machine!

A 40-foot power cord saves time, by reducing the number of electrical outlet changes needed during use.

The AUTOMATIC X4 is 12 inches wide, with a cleaning path of 10.5 inches and one-sided edge cleaning.

Its wheels protect all floor surfaces and provide smooth maneuverability.

The clog removal door, replaceable brush roller, and “sealing strip” are easy to access.

The vacuum’s gradual power-up extends motor life.